Server status
DCS version: 2.5.0.14304
SR version: 1.4.6.0
As of Feb 14, 2018
Latest topics
» DCS Huey Autorotations
Wed 21 Feb 2018 - 10:58 by (A/229) Huckleberry

» Coast Guard MH 65-D Flight
Sun 18 Feb 2018 - 22:39 by (A/229) Rob

» Basic Aviator Wings
Sat 17 Feb 2018 - 4:25 by (D/229) Flubber

» 15pin to USB
Wed 14 Feb 2018 - 7:43 by (A/229) Snap

» just Checking in...
Mon 12 Feb 2018 - 21:41 by (D/229) Gizzy

» DCS 2.5 rollout...
Sat 10 Feb 2018 - 13:44 by (A/229) Huckleberry

» just Checking in...
Fri 2 Feb 2018 - 2:10 by (H/229) Skeeter

» USAF SSgt looking for a promotion
Mon 29 Jan 2018 - 13:35 by (A/229) Chic

» SIMPLE RADIO Version
Mon 29 Jan 2018 - 4:15 by (HHC/229) GunfighterSIX

February 2018
MonTueWedThuFriSatSun
   1234
567891011
12131415161718
19202122232425
262728    

Calendar Calendar

World Clock

Simple Radio - additional mappings.

Go down

Simple Radio - additional mappings.

Post by Guest on Thu 29 Sep 2016 - 8:15

In the video posted above I showed a simplistic approach of just mapping your ICS Radio trigger in DCS to transmit.

Here are 2 other ways of doing things you may wish to consider....

1.  Using mappings to switch INT rotary to required radio and transmit at the same time

Example, using the MIC hat switch of the right hand throttle of the TMWH base unit.

In DCS map INT 1, 2 & 3 to 3 of the Hat switch positions.

In 'SR > CONTROLS' set 3 of the Hat switch's to radio 1, 2 & 3.

In 'SR> SETTINGS' set 'Radio switch works as PTT' to ON

Both the above are demonstrated in the pics below by RED BOXES.... (NOT GREEN BOX)

Now if you push the HAT switch, say forward, it switches the INT rotary to the right position and if you keep it pressed TRANSMITS too....
Same for all 3 radios.... - IF YOU CHOOSE to use it... your mapped DCS PTT still works fine....

Handy for working 3 radio nets in a tight situation.... one switch does all.

2.  Stop SR transmissions from activating the DCS drop down comms menus....

Fed up every time you use the PTT the DCS comms menu come up or disappears etc.... this is easy to fix....

Edit line 821 of DCS-SimpleRadioStandalone.lua file in your saved games / scripts folder......

Change    
Code:
   _data.control = 1; -- full radio
to
Code:
   _data.control = 0; -- full radio

and in 'SR > CONTROLS' map 'Common PTT' to a switch.

For me, originally I had the 1st stage TMWH trigger mapped in DCS to ICS radio Trigger.  I changed this mapping to the 2nd stage.

In 'SR > CONTROLS' I mapped 'Common PTT' to the first stage.

Now, 1st stage trigger engages SR transmissions, 2nd stage trigger engages DCS Comms menu....

SR Controls in the in the GREEN box below refers...





Any issues, shout - if you make any changes MAKE SURE THEY ARE WORKING FINE BEFORE JOINING THE BATT OP THIS WEEKEND

Guest
Guest


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum